How to Reset the Tire Pressure Light

Have you ever gone to inflate your tires at the local Jackson gas station, but you still see that the tire pressure light is on when getting back on the road? This means you may have to reset your tire pressure monitoring system (TPMS). The TPMS is an essential safety feature for your vehicle, so it’s important to make sure the system is functioning properly. If you find your TPMS light on after a fill up, read on with Wilson KIA to learn how to reset the tire pressure light, and discover what a flashing tire pressure light means. If you still have questions, don’t hesitate to contact us. 

Tips for Resetting the Tire Pressure Light

Once you’ve made your stop to fill your tires, the tire pressure light should reset itself automatically. Yet, if you still find the TPMS light on, there are a couple ways for how to reset the tire pressure light: 

• Hop on the Brandon highway and drive at or above 50 mph. Driving at that speed for 10 or more minutes should reset the sensor the next time you turn on the vehicle. 
• When entering your vehicle, turn the key to the “On” position, but don’t start the car. Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh. If you have problems locating the tire pressure monitor, check the vehicle’s owner’s manual. It’s typically located under the steering wheel. 
• Try inflating the tires to 3 PSI over the recommended level, then completely deflate them. The spare tire may be connected to the TPMS sensor as well, so ensure the spare is deflated as well. Once the tires are empty, inflate them to their recommended PSI. 
• Turn off the vehicle and carefully disconnect the positive battery cable with a wrench. Then, turn the car on and honk the horn for three seconds to discharge the charge still stored in the vehicle. Finally, reconnect the battery. 

Will My Tire Pressure Light Reset Itself?

In most vehicles, the tire pressure light will not reset itself automatically. It is designed to provide a continuous reminder until the underlying issue is addressed and the TPMS system is reset. It’s essential to take the necessary steps to reset the tire pressure light to maintain optimal tire performance, fuel efficiency, and overall safety.

Remember, proper tire maintenance, including regular inflation checks, can help prevent the tire pressure light from coming on and ensure a smooth and secure driving experience.

If you encounter persistent issues or need professional assistance, don’t hesitate to reach out to Wilson KIA. We’re happy to help diagnose and resolve the problem quickly!

What Should I Do If My TPMS Light Came On?

If your TPMS (Tire Pressure Monitoring System) light has been illuminated on your dashboard, don’t panic. Our service experts at Wilson KIA are here to guide you through the necessary steps to address this issue effectively. Learn how to diagnose potential causes, check tire pressure accurately, and take appropriate measures to resolve the TPMS light concern promptly.

If your TPMS light comes on, follow these steps to reset it:

• Pull over to a safe location away from traffic.
• Inspect your tires visually to identify any visible signs of damage or noticeable deflation.
• Use a reliable tire pressure gauge to measure the pressure in each tire, including the spare tire. Refer to your vehicle’s manual or the inside of the driver’s door for the recommended tire pressure.
• Inflate or deflate the tires as needed to match the recommended pressure. Be cautious not to over-inflate the tires, as it can lead to other issues.
• Once the tire pressures are adjusted correctly, start your vehicle and drive it at speeds above 20 mph for a few minutes to allow the TPMS to recalibrate.

Seeing a Flashing Tire Pressure Light?

If you see a flashing tire pressure light, that might be a sign to schedule service at the Ridgeland-area service center. Since the tire pressure sensors typically use batteries, the flashing tire pressure light might mean the battery needs to be replaced. It may also hint at an error with one of the TPMS sensors. At Wilson KIA, we’ll happily assess the problem, and get you back on the road. 

I Filled Up My Tires, So Why Is My TPMS Light Still On?

If you have recently filled up your tires and the TPMS light remains illuminated, there are a few possible reasons:

• Sensor malfunction: One or more sensors in your TPMS system may be faulty, requiring professional inspection and repair.
• Incorrect calibration: Ensure that the tire pressure gauge you used to measure the tire pressure is accurate. A faulty gauge can provide incorrect readings, leading to a persistent TPMS light.
• TPMS system reset: In some cases, manually resetting the TPMS system by following the steps outlined in your vehicle’s manual may be necessary.

Why Not to Ignore Your Tire Pressure Light

Ignoring your tire pressure light can lead to potential safety hazards and negatively impact your vehicle’s performance when driving from Brandon to Ridgeland. When the tire pressure light comes on, it indicates that one or more of your tires are underinflated, overinflated, or there may be an issue with the tire pressure monitoring system (TPMS). It’s crucial not to dismiss this warning and address the situation promptly.

Learn More Service Tips with Wilson KIA!

Now that you know what to do when you observe the TPMS light on, learn other tire care tips by browsing our service tips and tricks. From tire rotation to wheel alignments, the certified technicians in the Wilson KIA service center are ready to perform your maintenance with genuine Kia parts so you can get back on Brandon roads.